Roschen  Global
English
PRODUCTS
Home / Products / Core Barrel / Wireline Core Barrel / Wireline Core Barrel AQ BQ NQ HQ PQ
Share to:

Wireline Core Barrel AQ BQ NQ HQ PQ

Wire line core barrel is a special type of core drilling, most commonly used for minerals exploration. Unlike some types of drilling, the aim of core drilling is not to dig a hole, but to retrieve a core sample-a long solid cylinder of rock that geologists can analyze to determine the composition of rock under the ground.

Quantity:
  • AQ, BQ, NQ, HQ, PQ
  • ROSCHEN
  • ROS-COB-AQ/ BQ/ NQ/ HQ/ PQ

Product Description


Wireline Core barrel AQ, BQ, NQ, HQ, PQ


Product description:

Wireline core barrel is a special type of core drilling, most commonly used for minerals exploration. Unlike some types of drilling, the aim of core drilling is not to dig a hole, but to retrieve a core sample-a long solid cylinder of rock that geologists can analyze to determine the composition of rock under the ground. Wireline core drilling is a special type of core drilling, most commonly used for minerals exploration. Unlike some types of drilling, the aim of core drilling is not to make a hole, but to retrieve a core sample- a long solid cylinder of rock that geologists can analyse to determine the composition of rock under the ground.

 

Size Available:    

"Q" series    AQ, BQ, NQ, HQ, PQ/AQTK, BQTK, BQ3, NQ2, NQ3, NQTT, HQ3, HQTT, PQ3, PQTT

T2 series      T2 46, T2 56, T2 66, T2 76, T2 86, T2 101

T6 series      T6 76, T6 86, T6 101, T6 116, T6 131, T6 146, T6S 101, T6S 116

T series       T36, T46, T56, T66, T76, T86, T101, T116

TT series   TT36, TT46, TT56, TTT66, TT76, TT86, TT101

Z series       Z46, Z56, Z66, Z76, Z86, Z101, Z116, Z131, Z146

B series       B36, B46, B56, B66, B76, B86, B101, B116, B131, B146

WF series    NWF, HWF, PWF, SWF, UWF, ZWF

WT series    RWT, EWT, AWT, BWT, NWT, HWT, PWT

WM series    EWM, AWM, BWM, NWM, HWM

WG series    EWG, AWG, BWG, NWG, HWG

Triple Tubes        AMLC, NMLC, NMLC, HMLC, 4C, 6C, 8C, 10C

Minerals       S75, S85, S95, S101, S116, S131, S146, S150, S168, S178, S194, S214

Others    LTK48, LTK60, BGM, NGM, ADBG, TBW, TNW, ATW, BTW, NTW, NXD3, AX, NX, HX, NXC, AXT, T6H, 4 9/16, NWD4, 412F, SK6L146, TT46, TB56, TS116, CHD101.


Diamond bits Crown Shape and Applications:

1.    Flat: Applicable to drilling different levels of hardness or abrasive formation, generally for single and dual tube drill bits

2.    Semi-round: Good distribution of the diamond at bit face, adapt to a small broken or loose formation, applicable to drilling medium-hard and hard formation

3.    Ladder: Applicable to drilling medium -hard, broken or interbedded formations, hole deviation can be prevented

4.    Applicable to drilling medium -hard, have good stability during the drilling

5.     Bottom jetting: Bottom jetting applicable to drilling sedimentary or metamorphic formations which containing more power, high coring recovery rate and avoid excessive washout of core.

Structure:

The structure and work principle of wire line drilling tools , wire line drilling tools included core barrel assembly and overshot assembly: Outer tube assembly contains locking coupling, adapter coupling, landing ring, reaming shell, outer tube, outer tube and bit. inner tube assembly including spearhead point, detent mechanism, adjusting mechanism, Pensile institutions, tube assembly remove institutions, In position news agency and Core jams news agency etc. The structure and work principle of C series wire line drilling tools C series wire line drilling tools included core barrel assembly and overshot assembly:Outer tube assembly contains locking coupling,adapter coupling ,landing ring,reaming shell,outer tube,outer tube and bit. inner tube assembly including spearhead point,detent mechanism,adjusting mechanism, Pensile institutions, tube assembly remove institutions, In position news agency and Core jams news agency etc.

wire line core barrel structure

Advantages of Wire-line core barrel

 

1. Save Time and manpower

 

No need to take every piece of the drill strings out to get the samples, saving a lot of time to hoist and disassemble the drill rods, by using wireline core barrel. And core barrel could be moved from the bottom of the hole without removing the drill rod string assembly.

In this process most of time is available for drilling and so speedier progress can be made with the same time spent when drilling.

 

2. Get larger core samples

 

For wireline drilling, the rods are made of fine high tensile steel. This makes them thin, so that the core can be as large as possible.

 

3. Making deep exploration

 

Wire line drilling is possible up to a depth of 1000m, or far more than that.

NTW core barrel

Further products information, please don't hesitate to contact us.





QUICK LINKS

CONTACT US

Add: 65 EAST XINHUAN ROAD, SHANGHAI, CHINA
Tel: +86-21-54994419
Fax: +86-21-54380177
Whatsapp/WeChat: +86-13764195009

SALES TEAM LEADERS

Dr.Robert Roschen  /  Bill / Phiger  /  Rebecca

KEEP IN TOUCH
Copyright © 2019 Roschen Group Limited. All Rights Reserved