Industry news

• What is the working principle of diamond core bits？

  What is the working principle of diamond core bits？ The drill bit that makes the cutting edge is called a diamond core bit. The drill bit is an integrated drill bit. The entire drill bit has no moving parts. The structure is relatively simple, with high strength, high wear resistance and impact resi

  Industry news September 22, 2020
• What kinds of drill pipe can be divided into？

  What kinds of drill pipe can be divided into？ The drill pipe is a steel pipe with thread on the tail, which is used to connect the surface equipment of the drilling rig and the drilling and grinding equipment or bottom hole device located at the bottom end of the drilling well. The purpose of t

  Industry news September 18, 2020
• How to classify core barrels?

  How to classify core barrels? A section of pipe connected to the upper part of the drill bit to accommodate and protect the core during core barrel. This article will introduce the classification of core barrel. This article contains the following:n What is core barrel?n Single layer core barreln do

  Industry news September 15, 2020
• What's the advantage of impregnated diamond core bits?

  The impregnated diamond core bit has emerged as the most commonly used type in the mineral exploration industry. Compared with bits made of other cutting media, the advantages of using impregnated diamond bits include: wide application range, longer service life and so on.

  Industry news June 22, 2020
• How important wireline core barrels are?

  Wireline core barrels have many advantages and can be used in so many ways. They play an important role in mineral exploration. They are also fully compatible with other corresponding systems and always have available spare parts .

  Industry news June 18, 2020
• What's wireline core barrel used for?

  The core barrel plays an important role in diamond drilling because it is used to recover the core. Today, most diamond drillers use cable core drillers, which have become the standard for high-yield core recovery. To provide more convenience, they are fully compatible with other corresponding systems and spare parts are always available. But this is not the only application of wireline core barrel, through its special structure, it can provide a lot of application.

  Industry news June 12, 2020
• Design and operation of an extended core barrel.

  The extended core barrel's (XCB) coring system is used in sedimentological, climate, and paleoceanographic studies. Extended core barrel is usually used when the formation becomes too hard for the piston core or when its hardness is not sufficient to allow the use of the rotary core barrel (RCB) for effective harvesting.

  Industry news June 08, 2020
• How to stabilize core barrel?

  The core barrel assembly is the equipment that is used to recover core, and plays a very important role in the diamond drilling operation. The success of an operation depends on retrieving core efficiently，so it is well worth looking at it in detail.

  Industry news June 05, 2020
• What's features of impregnated diamond core bits?

  The impregnated diamond core bit is synthesized from very small, high-quality diamond through a uniformly mixed metal matrix. Select the hardness of the matrix through the appropriate rock formation, so that it wears evenly throughout the life of the bit, revealing new sharp diamonds. Higher diamond concentrations will increase longevity and permeability.

  Industry news June 01, 2020
• What's coventional core barrels?

  Cores are defined as cutting and removing cylindrical rock samples from a wellbore. Coring provides the operator with a relatively undamaged sample or cross section of the reservoir rock. By obtaining cores, geologists can study the porosity and permeability of underground rocks. Conventional coring and sidewall coring are the two most commonly used coring methods. Conventional coring uses a component called a "core barrel" that consists of a drill string that extends to the bottom of the hole. The core tube has a hollow inner tube, and the outer tube and drill string rotate around it and remain stationary. To reduce damage to the core, the operator can use a fiberglass cover or rubber cover. Special core drill is used for cutting. The hole surface of hollow drill has natural diamond or PDC cutting surface.

  Industry news May 29, 2020