Triple Tube Conventional Core Barrel

Product Description

Triple Tube Conventional Core Barrel

ROSCHEN Triple Tube Core Barrels are designed to maximize core recovery in site investigation and core exploratory drilling programs.

With these Core Barrels it is possible to obtain near 100% volumetric core recovery in the most undisturbed condition possible using rotary core drilling equipment. They have been used for exploration of dam, bridge and building sites as well as the development of mineral resources.

Triple Tube Core Barrels are normally supplied with stainless steel split inner tubes. Clear plastic tubing is available in NMLC size.

The plastic tubing is used when retaining the core exactly as it is recovered from the hole is desired. The core is left in the tube and the ends are sealed.

Visual examination is possible through the tubing on site or at the laboratory. The outer tubes are hard faced at each end to reduce wear and act as a stabilizer.

Size Hole Diameter Core Diameter Length Stock

CONVENTIONAL CORE BARREL SPECIFICATIONS

TYPE

SET BIT (O.D.)

HOLE SIZE (O.D.)

CORE SIZE (O.D.)

Imperial

Metric

Imperial

Metric

Imperial

Metric

BMLC

2.330"

59.18MM

2.360"

59.94MM

1.386"

35.20MM

NMLC

2.945"

74.80MM

2.980"

75.69MM

2.045"

51.94MM

HMLC

3.875"

98.42MM

3.906"

99.21MM

2.500"

63.50MM

3C

4.343"

110.31MM

4.375"

111.12MM

3.000"

76.20MM

4C

5.468"

138.89MM

5.500"

139.70MM

4.000"

101.60MM

6C

7.730"

196.04MM

7.750"

196.85MM

5.750"

146.04MM

8C

10.200"

259.10MM

10.250"

260.35MM

7.980"

202.70MM


 


Inquiry

4C 6C 8C Triple Core Barrel

Core barrel HWL/ NWL/ PWL

Wireline Double Tube Core Barrel HQ PQ BTW

Wire line core barrel T2 T6 series

AMLC NMLC HMLC Wireline core barrel