DTH Drill Bit COP64-203
Product Description
DTH Drill Bit COP64-203
Production Intruduction
CODE NO. | COP64-203 |
Shank type | COP64 |
Diameter | 203mm |
air holes | 3 |
gauge buttons | 10*18mm |
face buttons | 13*16mm |
Bit face type | convex face |
carbide design | Dome |
approx. weight | 32Kgs |
Rock Drill Tools Description:
ROSCHEN has dedicated in drilling line for many years to produce drilling tools. For DTH rock hammer and bits, we have
1) Bits for Low Pressure DTH Hammers
2) Bits for Medium & High Pressure DTH Hammers
3) Bits for High Efficiency High Pressure DTH Hammers
4) Bits for Through Reverse Circulation DTH Hammers
As the Rock drilling tools manufacturer, ROSCHEN can supply DTH Drill Bits with COP shank type they are available in a wide range of sizes. ROSCHEN DTH rock bits are with a number of custom design features for optimum performance in a rock formation, which are designed to match all conceivable applications for water well industries, mining and construction.
Rock drill bits Shank type:COP32, COP34, COP44, COP54, COP64; and DTH hammer bits hole diameter: 3'', 4'', 5'', 6'', 8''(85mm-350mm).
Concave Face
This bit face is designed specifically for medium hard and homogeneous rock formations. Good hole deviation control and good flushing capacity.
Dome/Hemispherical Buttons
Universal buttons for all rock formation, best suited to hardest and very abrasive rock formation.
COP shank DTH hammer bit with concave face, dome carbide buttons for water well industries, mining and construction